| Sign In | Join Free | My burrillandco.com |
|
Quality COFDM Video Transmitter & Mobile Video Communication factory
4 Years
| Ask Lasest Price | |
| Brand Name : | Kimpok |
| Model Number : | KP-R2200 |
| Certification : | CE |
| Price : | Negotiation |
| Payment Terms : | T/T, Western Union,Paypal |
| Supply Ability : | 3000pcs/month |
| Delivery Time : | 7 Working Days |
2.2G VRX Support FatShark Skyzone and Other Glasses with 8 Channels Receiver Module
I.Main features
Channel 8CH;
Support FatShark,Skyzone and other glasses VR headset display straight plug and analog display and other connection use;
High-sensitivity reception -97dBm;
High efficiency DC/DC power supply support 7-36V;
Support 5V voltage output;
Short click switch channel;
II.Product Parameter
Receiver(ground end):
Input voltage:7-36V DC(2-6S)
Output voltage:5V/0.5A
Video system:PAL/NTSC
Number of channels: 8 channels
Channel selection:Short press the switch frequency
Receiving frequency: 2000-2280MHz
Sensitivity:-97dBm (MAX)
Antenna interface:SMA(outer screw inner hole)
Modulation type:FM
III.Transmitter operation and adjustment part:
1.Frequency table
| CH1 2000 | CH2 2040 | CH3 2080 | CH4 2120 | CH5 2160 | CH6 2220 | CH7 2240 | CH8 2280 |
2.Use a key to adjust the channel,short press the change channel,as shown in the figure below.
| Channel control short press to switch the channel | ||||||||
| frequency | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
| channel | 2000 | 2040 | 2080 | 2120 | 2160 | 2200 | 2240 | 2280 |
| The green
indicator light
on | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
IV.Matters need attention:
1.Please installthe antenna and then connect the power supply to avoid equipment failure; Select the appropriate
working frequency and set the transmitter to the same frequency as the receiving end(see the frequency table for details);
2.The input voltage is 7-36V(2-6S),do not use over the voltage range;
The output voltage current is 5V/0.5A.Please note that if the power is supplied to other equipment through the receiver output,the working current is limited to 0.5A.Do not use the voltage output end of the product over the 5V0.5A,otherwise the receiver may be damaged;
3.Both 5V and 5V OUT are output terminals, do not connect to the power input terminal or the battery, otherwise it will cause damage.
|
|
